New here!!

[becauseican]

Well I finally got around to signing up here after Jeremy bugging me for months....add another forum to my favorites list. I am Randy and I have a green 96 4runner, with 4" lift 33" MTR's, rear Elocker, and some other junk. I went on a trip with some of you guys last summer, we went up to the look out by Chipmunk creek area, and had the bbq up on top of the mountain....

I have a performance/ fab shop in Langley, BIC Performance, we specialize in turbo's, tuning, engine swaps and custom exhaust /turbo systems and we are now a Haltech engine management dealer. We specialize in Toyota's, Supras mostly, but will work nearly anything, so if you need a custom exhaust, or turbo kit for your Jeep, I can do it. We are also starting to get into other fabrication work like custom bumpers, rock sliders etc.

Randy
www.bicperformance.com (http://www.bicperformance.com)

http://www.bicperformance.com/pics/4x4/liftwith285%27s%20%28Medium%29.JPG

http://www.bicperformance.com/pics/4x4/flex1%20%28Medium%29.JPG

http://www.bicperformance.com/pics/my_car/my%20car%20sig%20picture.jpg

http://www.bicperformance.com/pics/my_car/engine%20new1%20%28Medium%29.JPG

[Jeremy]

Welcome! Its a bout time :D

Should post a built thread on your bumper build. :headspin:

:party:

EDIT: P.S. what is that funny silver thing........a 240sx?:eek:

[Sero]

Welcome Randy!!

I guess I could of asked you about a custom tailpipe for my Jeep...if your not opposed to work on those.:D I got the pipe and bends to do it...we'll see how well I do.

I'm thinking of removing my air cleaner box so I can run a second battery, I may need a custom intake tube so I can run a cone filter, I'll see you for that.

[TheOtherSide]

Hey Randy....

Welcome!

I thought you were on 32's... did you upgrade? Nice stuff you got there!!

[becauseican]

Jeremy thats the same as the 240sx you have!!

Sero, sure bring it in and I can make you up a nice intake pipe, I have some 3" stainless piping here that would look nice.

I am running 285/75/16's so thats like 32.8" or something...33"'s just sound better and easier to type!!

[TheOtherSide]

I am running 285/75/16's so thats like 32.8" or something...33"'s just sound better and easier to type!!

I hear ya... the inch size is much quicker to say/type.

My MTZ's say they are 33's, but they measure 32"....:mad2: Time to buy Interco's next time.